Agenda Item
vii. Purchasing Cooperative Agreement ~ Sourcewell Contract #020923-TER ~ RFP 020923 -Portable Construction Equipment with Related Accessories and Attachments ~ Purchase of Scissor Lifts (Not to exceed $137, 987)
Summary: Presented by: Mr. Erick Hofstetter, Chief Operating Officer, Division of Operations
Request: It is requested that the DeKalb County Board of Education (“the Board”) approve the purchase of nine (9) commercial-grade scissor lifts for a not-to-exceed amount of $137,987.
Why: Approval of the use of the Cooperative Purchasing agreement will support maintenance operations in Operational Zone 3, with three (3) lifts assigned per area (Areas 7, 8, and 9) and distributed to designated high school sites. Currently DeKalb County School District services 140 schools and district facilities with 5 total lifts. This investment to purchase additional lifts supports DCSD’s focus on preventative maintenance, safety, and timely resolution of high-access issues, while empowering local facility teams to act proactively and independently.
Details: DeKalb County School District currently operates with an estimated five (5) total lifts to support maintenance activities across 140+ school facilities. This limited availability significantly delays response times for routine and urgent ceiling-level maintenance tasks, including but not limited to light fixture replacement, ceiling tile repairs, air duct cleaning, and high-area inspections.
This purchase proposes assigning three (3) lifts per Zone 3 Area, strategically based at:
Area 7: Lithonia HS, M.L. King Jr. HS, Arabia Mountain HS
Area 8: Towers HS, Columbia HS, Miller Grove HS
Area 9: Cedar Grove HS, McNair HS, Southwest DeKalb HS
Each high school serves as a central hub for its surrounding middle and elementary schools. Stationing one lift at each of these high schools enables the Plant Engineers to support the entire feeder cluster efficiently, dramatically reducing nonproductive time spent waiting for the district's shared lifts and coordination delays involved in district-wide equipment rotation.
The lifts will be standard indoor/outdoor electric scissor lifts with a maximum indoor working height of 19’ feet, equipped with:
Fall protection rails
Non-marking tires
Extension decks
Safety interlocks and emergency lowering systems
On-board diagnostic system with battery charge indicator.
Each lift will be delivered directly to its assigned high school location with appropriate orientation and safety materials provided to Plant Engineers.
Procurement will be through a competitively awarded cooperative purchasing Sourcewell Contract #020923-TER, (TEREX) an approved dealer offering not to exceed pricing compliant the Sourcewell Contract #020923-TER pricing structures. The brand of scissor lifts to be purchased is Genie, a Terex Brand, through local dealer, Yancey Brothers CAT.
Furthermore, attached is a competitive quote for comparable equipment from another vendor (Grainger) to ensure fiscal responsibility. Contract #020923-TER, confirms the selected local dealer/vendor as the most cost-effective and responsive option for this procurement.
Financial impact: The total project amount in a not to exceed amount of $137,987 will be allocated from General Fund Budget - Deferred Maintenance
100.2600.543013.00011.7520.9990.8013.040.0000
Contact: Mr. Erick Hofstetter, Chief Operations Officer, Division of Operations, 678-676-1470
Mr. Bobby Moncrief, Director, Facilities Management, Division of Operations, 678.676.1478
Effective: Upon Board Approval
Status: Approved by the Office of Legal Affairs
Electric Slab Scissor Lifts ANSI A92.20, CSA B354.6
Genie GS™-1930 & GS-1932
®
Specifications
Models GS-1930 GS-1932
Measurements US Metric US Metric
Working height max. - indoor(1) 25 ft 3 in 7.85 m 25 ft 3 in 7.85 m
Working height max. - outdoor(1) 20 ft 8 in 6.47 m 20 ft 8 in 6.47 m
A Platform height max. - indoor 19 ft 3 in 5.85 m 19 ft 3 in 5.85 m
A Platform height max. - outdoor 14 ft 8 in 4.47 m 14 ft 8 in 4.47 m
B Platform height - stowed 3 ft 5 in 1.04 m 3 ft 5 in 1.04 m
C Platform length - outside 5 ft 5 in 1.64 m 5 ft 5 in 1.66 m
C Platform length - outside, extended 8 ft 5 in 2.55 m 8 ft 5 in 2.55 m
Slide-out platform extension deck - length 2 ft 11.8 in 0.91 m 3 ft 0.91 m
D Platform width - outside 2 ft 5.9 in 0.76 m 29.9 in 0.76 m
G uardrail height 3 ft 7 in 1.10 m 3 ft 7 in 1.10 m
T oeboard height 6 in 15 cm 6 in 15 cm
E Machine Height - stowed (folding rails) 7 ft 1 in 2.16 m 7 ft 1 in 2.16 m
Machine Height - stowed (rails lowered) 5 ft 11 in 1.80 m 5 ft 11 in 1.80 m
F Length machine - stowed 6 ft 1.83 m 6 ft 1.83 m A
F Length machine - stowed, extended 8 ft 11 in 2.73 m 8 ft 11 in 2.72 m
G Width 2 ft 6.2 in 0.77 m 32.2 in 0.82 m
H Wheelbase 4 ft 4 in 1.32 m 4 ft 4 in 1.32 m
I Ground clearance (center) - pothole guards retracted 3.2 in 8 cm 3.2 in 8 cm
I Ground clearance - pothole guards deployed 0.9 in 2.30 cm 0.9 in 2.30 cm
Productivity
Max. platform occupancy (in/out) 2/1 2/1
L ift capacity 500 lb 227 kg 500 lb 227 kg
Lift capacity - extension deck extended 250 lb 113 kg 250 lb 113 kg
Max. platform drive height 19 ft 3 in 5.85 m 19 ft 3 in 5.85 m
Drive speed - stowed 2.5 mph 4.0 km/h 2.5 mph 4.0 km/h
Drive speed - raised 0.5 mph 0.8 km/h 0.5 mph 0.8 km/h
Gradeability - stowed(2) 25 % 25 %
Turning radius - inside/outside 0 / 5 ft 1 in 0 / 1.55 m 0 / 5 ft 1 in 0 / 1.55 m
Lifting speed - raise/lower 26 / 22 sec 26 / 22 sec C
Tilt sensor activation (front to back/side to side) 3° / 1.5° 3° / 1.5°
Tires - solid non-marking 12 × 4.5 in 31 × 11 cm 12 × 4.5 in 30.5 × 11.5 cm
Power
Power - FLA 24 V DC (4 × 6 V 210 Ah) 24 V DC (4 × 6 V 210 Ah)
Power - Lithium-Ion 24 V DC (1 × 24 V 90 Ah) 24 V DC (1 × 24 V 90 Ah)
Hydraulic tank capacity (E-Drive) 1 gal 3.8 L 1 gal 3.8 L
Weight(3) and Floor Loading(4) B
Weight 3,209 lb 1,456 kg 2,929 lb 1,329 kg
Weight max. (adding all possible options) 3,354 lb 1,521 kg 3,205 lb 1,454 kg
Tire load max. 1,483 lb 672 kg 1,473 lb 668 kg H
Tire contact pressure 165 psi 1,136 kPa 164 psi 1,128 kPa
Occupied floor pressure 287 psf 13.73 kPa 258 psf 12.38 kPa
F
Sound and Vibration Levels
Sound Pressure level (ground workstation) < 70 dBA < 70 dBA D
Sound Pressure level (platform workstation) < 70 dBA < 70 dBA
V ibrations < 8 ft 2 in/s² < 2.5 m/s2 < 8 ft 2 in/s² < 2.5 m/s2
E
(1) The metric equivalent of working height adds 2 m to platform height. US adds 6 ft to platform height.
I
(2) Gradeability applies to driving on slopes and may vary depending on options and machine configurations. See operator’s manual G
for details regarding slope ratings.
(3) Weight refers to standard configuration and may vary depending on options and/or country standards.
(4) Floor loading information is approximate and may vary depending on options and machine configurations. It should be used only
with adequate safety factors.
Electric Slab Scissor Lifts ANSI A92.20, CSA B354.6
Genie GS™-1930 & GS-1932
®
SKU: Standard Model SKU: Standard Model
• GS-1930, E-Drive * • GS1932E1AE0002: GS-1932, E-Drive
* Build to Order
Option availability S S+ BtO S Standard
Standard FLA flooded lead acid batteries ✔ ✔ ✔ S+ Standard +
AGM Maintenance-free batteries ✔ ❍ ❍ BtO Build to Order
Power
Lithium-Ion battery ✔ ✔ ❍ ✔ Standard Features
Drive cut-out while charging ✔ ❍ ❍ ❍ Options
Power Inverter ✔ ❍ ❍
Rear recessed charger receptacle ✔ ✔ ✔
Folding rails, Half-height swing gate ✔ ✔ ✔
Slide out extension deck ✔ ✔ ✔
Air line to platform ✔ ✔ ❍ Indoor & Outdoor Use Side Forklift Pockets Optional E-Drive
Automotive-style horn ✔ ❍ ❍
AC power to platform ✔ ✔ ✔
Descent, tilt and motion alarm ✔ ✔ ✔
Platform
Diamond plate platform deck ✔ ✔ ✔
Dual LED flashing beacons ✔ ✔ ✔
Electric horn ✔ ✔ ✔
Lanyard attachment points ✔ ✔ ✔
Platform control guard (PCON) ✔ ✔ ✔
Platform load sense system ✔ ✔ ✔
Proportional drive and lift ✔ ✔ ✔
SmartLink dual zone control system ✔ ✔ ✔
Lift Connect Telematics ✔ ❍ ❍
Lift Connect with Access Manager upgrade ✔ ❍ ❍
Biodegradable hydraulic oil ✔ ✔ ❍
EE Certification (Hydraulic drive) ✔ ✔ ❍
Lift Guard White Noise Alarm ✔ ❍ ❍
Lift Tools Spill Guard (E-Drive) ✔ ✔ ❍
Auxiliary platform lowering ✔ ✔ ✔
Chassis
Driveable at full height ✔ ✔ ✔
Dual front wheel sealed AC electric drive motors (E-Drive) ✔ ✔ ✔
Electric brake release (E-Drive) ✔ ✔ ✔
On board diagnostic system with battery charge indicator ✔ ✔ ✔
Pothole protection ✔ ✔ ✔
Side and rear fork pockets ✔ ✔ ✔
Solid non-marking tires ✔ ✔ ✔
Tech Pro Link connector ✔ ✔ ✔
Tie-down and lifting points ✔ ✔ ✔
Genie Genuine Accessories(1)
• Lift Tools Productivity Tools
• Lift Connect Telematics
• Tech Pro Link Handheld Device
(1) More accessories available from Genie Genuine Parts.
Product specifications are subject to change without notice or obligation. Photographs and/or drawings herein are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on proper equipment use. Failure to follow
instructions in the Operator’s Manual may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied.
Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their subsidiaries in the USA and many other countries. Terex, Genie, Quality By Design, Xtra Capacity, Lift Power, Lift Guard, Lift Tools, Lift
Connect and Tech Pro Link are registered trademarks of Terex Corporation or its subsidiaries.
10/24
© 2024 Terex Corporation